Network controller – GWAB11

Network Controllers – GWAB11 has four inputs for up to four GWNET11s in series. A total of 16 temperature lines per input and a maximum of 64 temperature lines per GWAB11.
Up to seven GWAB11 can be connected in series.
The connection is made with a signal cable according to a special specification.

ATEX and IECEx approved.

U – Nominal voltage: GWAB11-01: 230VAC, 50Hz GWAB11-02: 115VAC, 60Hz
P – Nominal power: 5 W
Um – Maximum voltage on any terminal for non-intrinsically safe circuits without invalidating safety: 250 V r.m.s
U – Maximum open circuit voltage on any intrinsically safe terminal: 7.2 V
I – Maximum short circuit current on any intrinsically safe terminal: 281 mA
P – Maximum matched output power on any intrinsically safe terminal: 477 mW
C – Maximum total capacitance on the intrinsically safe terminals: 13.2 µF
L – Maximum total inductance on the intrinsically safe terminals: 400 µH
L /R – Maximum external inductance to resistance ratio on the intrinsically safe terminals: 70 µH/Ω
IP-code: IP66
Maximum surface temperature: 85°C
Operating temperature: -20°C – +50°C
Size: L=260 mm, W=160 mm, H=90 mm
Certification: IECEx: GB/EXV/QAR19.0001/00 ATEX: ExVeritas 19PQAN0088
Marking: IECEx: Ex tb [ia] IIIC T85°C ATEX: II (1D) 2D Ex tb [ia] IIIC T85°C
Maximum number of GWNET11 that can be connected to each sensor cable input in the GWAB11 when using temperature lines GWSL1100/2100: 4
Maximum number of temperature lines GWSL1100/2100 that can be connected to each sensor cable input in the GWAB11 : 17 using 4 GWNET11
Maximum length of cable that can be used for one sensor cable input in the GWAB11 when using GWNET11 and temperature lines GWSL1100/2100: 1000 m using a cable with max 400pF/m
  • Network Switch – GWNET11
  • Temperature line – GWSL1100
  • Temperature line – GWSL2100
  • Interface – Web or Grain App

Do you want to know more?

Please fill out the form and we will contact you as soon as possible.

Name
This field is for validation purposes and should be left unchanged.